The rhenium mocvd heater manufacturer tells you that the heater coil is wound on the heating medium in a reasonable way to induce heat, and will not rise arbitrarily around the coil according to the technical parameters, which will cause the movement to deviate from the optimal working state. There may also be some electromagnetic induction heaters. defect. So, let's talk about how heater coil winding is done.

Heater coil winding method:
1. The rhenium mocvd heater manufacturer tells you that there are many ways to wind the coil. According to the shape of the on-site heating body, it can be divided into flat coil, circular straight winding coil and U-shaped winding method. Here we introduce the circular straight winding coil, this winding method is to expand the winding according to the size and length of the cylinder, equip the power of several power heaters, and disperse the length of the coil winding.
2. There are two ways to wind the wire, one is to wind it next to the other wire, that is, to stop the winding before winding, which is what we usually call the dense winding method. This winding method is used when the length of the cylinder is limited. This winding method is usually not used when the cylinder is long enough. rhenium mocvd heater manufacturers tell you that due to this comparison and collection of winding methods, the hot hand is concentrated in the center of the winding. ) is generally not used when the cylinder length is long enough. rhenium mocvd heater manufacturers tell you that due to this comparison and collection of winding methods, the hot hand is concentrated in the center of the coil. So for a cylinder of a certain length, in order to increase the handyman can be evenly loose on the drum, we usually recommend choosing another winding method: one circle to four or five or six circles, and then separated by six or seven centimeters, then Close in sections.
3. The manufacturer of the rhenium mocvd heater tells you that since the coil is close to the heated object, we recommend that the user choose a wire that is resistant to high temperature and more than 250 degrees. The data chosen should be fire and flame retardant. The manufacturer of the rhenium mocvd heater tells you that for some special applications, a temperature resistance higher than 300 degrees may be required. Please decide for yourself.