Molybdenum Rhenium wire is generally prepared by double sintering method, powder metallurgy method or medium temperature sintering method.

The process route of the double sintering method is as follows: Molybdenum Rhenium wire manufacturer tells you to mix molybdenum powder and rhenium powder, then pressurize and heat up for pre-sintering, then vacuum sintering, and finally sinter under the protection of hydrogen into molybdenum-rhenium sintered ingots.
The process route of powder metallurgy is as follows: mix molybdenum powder and rhenium powder, then pre-sinter into molybdenum-rhenium pre-sintered ingot, and then sinter at high temperature into molybdenum-rhenium sintered ingot.
The process route of the medium temperature sintering method is as follows: The Molybdenum Rhenium wire manufacturer tells you to first reduce molybdenum oxide to molybdenum powder, ammonium rhenate to rhenium powder, then ball mill and mix the two, and then pressurize under the mixing of inert gas and reducing gas The molybdenum-rhenium sintered ingot can be sintered at elevated temperature.
Molybdenum Rhenium wire manufacturers remind you to pay attention: no matter which preparation method is used, there are high requirements for the purity of molybdenum powder and rhenium powder.